优先级 15 · 多信使触发与联合 · 引力波探测器技术
Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors
Amato, A., Bazzan, M., Cagnoli, G., et al.
原文摘要Abstract
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers. In order to test the hypothesis of a correlation between the synthesis conditions of the films and their elemental composition and optical and mechanical properties, we varied the voltage, current intensity, and composition of the sputtering ion beam, and we performed a broad campaign of characterizations. While the refractive index was found to monotonically depend on the beam voltage and linearly vary with the N/Si ratio, the optical absorption appeared to be strongly sensitive to other factors, as yet unidentified. However, by systematically varying the deposition parameters, an optimal working point was found. Thus we show that the loss angle and extinction coefficient of our thin films can be as low as <inline-formula><mml:math><mml:mrow><mml:mo>(</mml:mo><mml:mn>1.0</mml:mn><mml:mo>±</mml:mo><mml:mn>0.1</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mrow><mml:mn>10</mml:mn></mml:mrow><mml:mrow><mml:mo>-</mml:mo><mml:mn>4</mml:mn></mml:mrow></mml:msup><mml:mtext> </mml:mtext><mml:mtext> </mml:mtext><mml:mi>rad</mml:mi></mml:mrow></mml:math></inline-formula> at <inline-formula><mml:math><mml:mo>~</mml:mo><mml:mn>2.8</mml:mn><mml:mtext> </mml:mtext><mml:mtext> </mml:mtext><mml:mi>kHz</mml:mi></mml:math></inline-formula> and <inline-formula><mml:math><mml:mo>(</mml:mo><mml:mn>6.4</mml:mn><mml:mo>±</mml:mo><mml:mn>0.2</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mn>10</mml:mn><mml:mrow><mml:mo>-</mml:mo><mml:mn>6</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> at 1064 nm, respectively, after thermal treatment at <inline-formula><mml:math><mml:mrow><mml:mn>900</mml:mn><mml:mtext> </mml:mtext><mml:mo>°</mml:mo><mml:mi>C</mml:mi></mml:mrow></mml:math></inline-formula>. To the best of our knowledge, such loss angle value is the lowest ever measured on this class of thin films. We then used our silicon nitride thin films to design and produce a multimaterial mirror coating showing a thermal noise amplitude of <inline-formula><mml:math><mml:mrow><mml:mo>(</mml:mo><mml:mn>10.3</mml:mn><mml:mo>±</mml:mo><mml:mn>0.2</mml:mn><mml:mo>)</mml:mo><mml:mo>×</mml:mo><mml:msup><mml:mrow><mml:mn>10</mml:mn></mml:mrow><mml:mrow><mml:mo>-</mml:mo><mml:mn>18</mml:mn></mml:mrow></mml:msup><mml:mtext> </mml:mtext><mml:mtext> </mml:mtext><mml:mi>m</mml:mi><mml:mtext> </mml:mtext><mml:mrow><mml:msup><mml:mrow><mml:mi>Hz</mml:mi></mml:mrow><mml:mrow><mml:mo>-</mml:mo><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>2</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:mrow></mml:math></inline-formula> at 100 Hz, which is 25% lower than in current mirror coatings of the Advanced LIGO and Advanced Virgo interferometers, and an optical absorption as low as (<inline-formula><mml:math><mml:mrow><mml:mn>1.6</mml:mn><mml:mo>±</mml:mo><mml:mn>0.5</mml:mn></mml:mrow></mml:math></inline-formula>) parts per million at 1064 nm.
展开 ▾
用于引力波探测器低噪声镜面镀层的离子束溅射氮化硅薄膜研制 · 该工作通过调节离子束溅射参数并热处理,研制出低损耗氮化硅薄膜并获得迄今最低损耗角,进而设计出热噪声比 Advanced LIGO/Advanced Virgo 现用镀层低约25%的多材料反射镜镀层。
预印本 2024-09-11 · 刊出 2025-02-07 · 收录 2026-10-12